The compression ratio is only be displayed after about 1 MB of data has been written since power-on. Operator Attention Required lower light —amber Steady amber A serious hardware error has occurred. Remember that this will reduce the amount of data you can back up to the magazine, since you will only have five slots available for data cartridges. In Random mode, the Select button is disabled. More details on the rules may be found in the wiki. HP drives can be configured to treat non-MRS tapes as write-protected. Submit a new text post. 
| Uploader: | JoJorn |
| Date Added: | 17 May 2016 |
| File Size: | 25.91 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 26398 |
| Price: | Free* [*Free Regsitration Required] |
HP DDS Drives
Tells the drive to transfer sense data to the host. Load Tape Button Use the Load Tape button to load the selected cartridge from the magazine into the drive. Cleaning the Heads in Stacker Mode 1 Place the cleaning cartridge into one of the magazine slots for example, slot 1 and insert the magazine into the autoloader. Following the 35 seconds, it does this.
If necessary, call for Service. The changer selects another cartridge from the magazine and transfers it to the drive. Yea but the repositories are all different now and I can't find the LTT in any of them.
The autoloader will then have to be returned to the factory. The following c1537s summarizes which drive can write and read which tapes.
These include the following: Flashing green 4 Hz Data is being read or written, or activity other than the cartridge being loaded or unloaded is occurring. And for good tirmware Solaris same old ftp and Solaris amd64 still same old ftp.
Notice The information contained in this document is subject to change without notice. Glossary-4 Edition 8—December stacker mode Autoloaders only: This also checks which magazine slots contain cartridges. A hard fault condition has occurred that the drive cannot easily clear. This is done by representing strings of bytes c1537s codewords.
Turn the hexagonal key or small crosspoint screwdriver anticlockwise to release the cartridge—this may take more than turns.
If it still fails, call for service. The terminator both absorbs signals and provides power to the lines in the cable. Welcome to Reddit, the front page of the internet. Retries Limits on Rewrites For Read-After-Write rewrites, each frame can be rewritten up to a maximum of times giving writes of the frame.
Grounding The 5V and 12V grounds are both connected to the chassis. The drive unloads any currently loaded cartridge, and the changer mechanism returns the cartridge to the magazine. Have you tried something along these lines? This will allow the drives to store firmawre maximum amount of data on a tape.
NSLU2-Linux - HowTo / AddTapeDrive browse
Push the magazine fully home or remove it. Allow Resequencing While the autoloader is in Stacker mode, you can select another cartridge to be loaded into the drive by using the Select and Load buttons.
Obtain a good copy of the firmware upgrade. An appropriate method to establish whether you have adequate airflow over the drive is to measure temperatures at two key sites. The tape is now positioned at BOD. Power-Fail Handling If there is a power-fail, the drive performs the following actions, and reverts to its default configuration when power is restored: Transfers one or more c1537z from the host to the current logical position on the tape.
HPE: Library & Tape Tools? : sysadmin
Make sure that the small arrows on the magazine and cartridge fifmware up. Has the SCSI bus been correctly terminated? Become a Redditor and join one of thousands of communities.
No comments:
Post a Comment